berfor rad technologies
forcat 2000
log trailer
Log trailer with an integrated plate to fit a hydraulic log loader

48" light utility front blade to adapt in the front pile up blade for other use than forestry.

Can be used for snow, sand, gravel, etc...

SPECIFICATIONS
Model

LT-50
Total width
55"
Total length
173"
Volume of loading
81.2 pi³
Length of loading
104"
Stakes
4 std. / 4 opt.
Ground clearance
16 ¾"
Payload
11000 lb
Tire
9.5L - 14 (8 ply)
Weight (lb)
1256
light utility front blade
forcat 2000
hydraulic valves
When the FORCAT 2000 is lifted by the rear back plate and the front pile up blade, the track tension drops to allow easy access and maintenance.
PARTICULAR CHARACTERISTICS

• The FORCAT 2000 is lifted from the ground when the rear back plate and front pile    up blade are dropped down to their maximum.
• The bottom of the FORCAT 2000 is flat at full length.
• The hydrostatic drive allows independent control of both tracks forward or backward.
• Zero turn.
• Low impact for a great performance on wet grounds.
• Gets the operator right next to the trees.
• ROPS & FOPS (CSA, SAE, ISO) approved cab.

Specifications are subject to change without notice

retour
Hydraulic valves with floating position to operate the winch, the rear back plate and the front pile up blade. The floating position on the winch allows the operator to drop the load before passing through a rough ground condition. The floating position on the rear back plate allows the operator to lean heavy logs on the rear back plate to make them follow the ground surface. The floating position on the front pile up blade will make it follow the ground surface.